VISIONETTE

A Complete Television System

System Specifications:

(Closed Circuit camera and receiver)

Power input: 120 VAC, 50-60 Hz

Scanning disks: Aluminum, 8.25" diameter with spring coupling to the drive motor. The disk is equipped with 24 round holes in a spiral that provides a .9" X .9" image. Scanning is from left to right and from top to bottom of the image.

Scanning Format: 24 lines, 30 frames /second, progressive linear scanning. (25 frames /second on 50 Hz)... (Note: An actual screen photo above)

Motor: 1800/1500 RPM, ball-bearing, split phase hysteresis synchronous.

Camera Light Requirement: Approximately 50 foot candles. A 150 watt reflector flood at 3 feet from a high contrast subject is usually sufficient.

Camera output signal: 6 volts peak, positive going into 1k ohm. (white is more positive). Coaxial cable coupling to receiver.

Image Lens: Pre-owned 135 mm/F:2.8, focussing mount 35mm camera lens.

Focus range:Approximately 2 to 4 feet.

Camera Amplifier:Dual operational amplifier with built in isolated, regulated power supply. Unbalanced input, unbalanced output.

Camera Pick up Device: Large area silicon photo cell.

Receiver Light source:Orange, 8 LED hi-intensity array

Framing Device:Adjustable light source position and motor interrupt switch.

Image controls:Brightness and contrast.

Cabinet Dimensions:Camera (10"x 10.5"x 9"), Receiver (12.5"x 11"x 7")

"VISIONETTE" Photos

HOME